GH5188 solution-strengthening cobalt-based superalloy, adding 14% tungsten solid solution strengthening, makes the alloy have excellent high-temperature thermal strength, adding high content of chromium and trace lanthanum, so that the alloy has good high-temperature oxidation resistance, and has Satisfactory forming, welding and other process properties, suitable for manufacturing aero-engine parts that require high strength below 980°C and anti-oxidation below 1100°C. It can also be used on aerospace engines and space shuttles. It can produce and supply various deformed products, such as sheet, medium plate, strip, bar, forging, wire and precision casting.
1.4 The chemical composition of GH5188 (GH188) is shown in Table 1-1.
Table 1-1%
C: 0.05~0.15
Cr: 20.0~24.0
Ni: 20.0~24.0
Co: margin
W: 13.0~16.0
Fe: ≤3.0
B:≤0.015
La: 0.03~0.12
Mn: ≤1.25
Si: 0.20~0.50
P: 0.020
S: 0.015
Ag: 0.0010
Bi: 0.0001
Pb: 0.0010
Cu: 0.07
1.5 GH5188 (GH188) heat treatment system Hot rolled sheet 1170~1190ºC, air cooling; cold rolled strip and plate 1165~1230ºC, rapid air cooling; bar and forging 1180ºC±10ºC, rapid air cooling.
1.6 GH5188 (GH188) Varieties, Specifications and Supply Status Supply of cold-rolled sheets with δ0.5-4mm, hot-rolled plates with δ4-14mm, cold-rolled strips with δ0.05-0.8mm, and bars of various sizes, Forgings, welding wire and precision castings. Plates are supplied after solution treatment, pickling, straightening and trimming; strips are supplied in coils after solution treatment, pickling and trimming; plates are solution-treated and then polished or polished for delivery; forgings are delivered in Supplied in solution state; precision castings are delivered in as-cast state.
1.7 Melting and casting process of GH5188 (GH188) The alloy is produced by vacuum induction melting plus electroslag remelting or vacuum electric remelting process. Precision castings are made by vacuum induction melting and casting by vacuum remelting of mother alloy ingots.
1.8 GH5188 (GH188) application overview and special requirements This alloy is widely used in the manufacture of high temperature components of gas turbines and missiles, such as combustion chambers, tail nozzles and heat exchangers in the nuclear energy industry. High-temperature components such as aero-engine combustion chamber flame tubes and guide vanes made of this alloy in China have passed the long-term test test and have been put into production and application. In the manufacturing process of processing the alloy sheet into parts, any process (such as heat treatment, welding, etc.) should prevent carburization and copper pollution, so as not to damage the mechanical properties and corrosion resistance of the alloy.
Company Profile
Test Equipment :
Company strength:
Certificate: Welcome to contact us,thanks
Our products sales all over the world as well. From the following two websites you can also get more information about our company: http://xingda-alloy.en.made-in-china.com http://xingda-alloy.en.made-in-china.com Welcome to contact us,thanks