Application overview and characteristics of GH35A:
GH35A is a Fe-Ni-Cr-based precipitation hardening deformed superalloy, and the operating temperature is below 750ºC.
The alloy is developed on the basis of GH2035 alloy by adjusting the content of carbon, boron, aluminum and titanium, and changing the heat treatment system.
In addition to the advantages of the original alloy, the alloy also has higher strength, better microstructure stability and good hot workability.
The main products of GH35A are hot rolled and forged bars, forgings and rings.
GH35A alloy has been used to manufacture more than ten kinds of components such as turbine inner and outer rings and support rings of various aero-engines, and has been put into mass production.
GH35A alloy precipitates after long-term aging. Phase, but the growth rate is very slow, and no longer grows when it grows to a certain length. Precipitated when aged at 700ºCx10000h and 750ºCx4000h. The phase sizes are all below 20 μm, which has little effect on the properties of the alloy.
Material grade: GH35A (GH1035A, GH2035A).
GH35A material execution standard:
GB/T 14992-Classification and designation of high temperature materials of superalloys and intermetallic compounds
GJB 3165A-Specification for hot-rolled and forged bars of superalloy for aviation bearing parts
HB/Z140-Heat treatment process of aviation superalloy
GH35A chemical composition analysis:
Chemical composition:
C Cr Ni W Al Ti Fe
0.05-0.11 20.0-23.0 35.0-40.0 2.50-3.50 0.20-0.70 0.80-1.30 Balance
B Ce Mg Si Mn S P
0.010 0.050 ≤0.010 ≤0.80 ≤0.70 ≤0.020 ≤0.030
Melting process of GH35A:
Adopt electric arc furnace + electroslag remelting, or non-vacuum induction furnace + electroslag remelting, or vacuum induction furnace + electroslag remelting smelting process.
Heat treatment system of GH35A:
The standard heat treatment system for hot rolled and forged bars and forgings is: 1080ºCx2h/WQ+680ºCx16h/AC.
GH2035A Variety Specifications and Supply Status:
Specifications of GH35A:
The diameter of the special material is generally 20mm~300mm, and the length is usually 2000mm~6000mm; silver pieces and ring pieces of various specifications.
Supply status of GH35A:
Hot rolled and forged bars, forgings and rings are generally supplied without heat treatment.
Company Profile
Test Equipment :
Company strength:
Certificate: Welcome to contact us,thanks
Our products sales all over the world as well. From the following two websites you can also get more information about our company: http://xingda-alloy.en.made-in-china.com http://xingda-alloy.en.made-in-china.com Welcome to contact us,thanks